Monday 20 January 2014

My last tutorial before the holidays...


My Last Tutorial before the Holidays

I had three concerns before going into tutorial these were:

1.  I needed to find other method/techniques that would allow me to transfer my digital drawings onto a surface.

2.  When working bigger, what materials would I use? Acetate works for small-scale samples but larger acetate would not be long lasting and currently I want a single piece of material that can be etched to create folds to create 3-d net shapes but finding one thin enough yet strong is difficult, it also has to be transparent.

3.  Scale is currently a major issue, I want to create something large scale that aims towards a gallery space so it has to be large but I am unsure of how to achieve this, to work in multiples or work with separate pieces and then join them together to create one piece.

All of these concerns are holding me back from developing my visual samples further. I know I want to include my digital designs based on natural forms and connect them to geometric forms but finding the best combination is difficult but exciting to experiment. After tutorial and discussing these issues with my tutor and other students, I came up with starting solutions that would give me something to work from and develop:

1.  The new method of transferring my digital drawings onto a translucent material will be print medium. My specialism is print and I have been considering applying print from the start so now seems a good of place as any to begin integrating this within my final project. As I will be using clear materials it is incredibly important that my prints be created with a good quality finish so I have decided to use pigment binder, this will give my work a clean and clear finish with hopefully no watermarks.

2.  I gave material choice a lot of thought and without laser cutting them and working with the materials specifically it is hard to distinguish what would work. I decided to select materials that have the following qualities within them, they have to be thin, clear, and strong enough to hold shape and they have to be able to fold once certain lines are engraved. I have decided to start experimental work with thicker acetate and Perspex.

3.  Scale is something that needs to be explored, over the Christmas holidays I will experiment with multiples and working larger in singular areas that will be put together upon construction.

Other aspects to continue and be aware off:

1.  Decide and prepare digital drawings that I will want to print with, print twice on acetate, and do this process for four designs.

2.  Explore different formats and shapes.

3.  Prepare illustrator with net shapes that will be used on new materials for testing.

4.  If I am using multiples, consider how they would all attach together.

5.  Decide on a Live Brief, Humpties or Bradford.

6.  Re-look over my Learning Agreement.

7.  Make sure my blog and sketchbook are up to date.

Composition...

I found out about Soo Sunny Park through our PE presentations when someone else used her as part of their inspiration. I think Park's work was of particular interest to me because her work dominates a space, it fills a space with a striking presence and this is what I want my piece to entail, I want my work to dominate the space it is situated in. Park's work also seems geometrically motivated; her work contains many geometric forms that have detail precision within its structure, structures that are to a very large scale. I have been working with precision, structure and geometric shapes from the beginning of this project in small scale and now I have figured out where my context will work towards (gallery situated), I want to proceed with experimental work on a larger scale, whether working in multiples or singular (to be joined later on in construction). I have also been working from one sheet of acetate, to create and work on a larger scale, each side of a geometric shape could be created from one sheet, then attached together on construction to form a certain structure.
 

Park's work has inspired me to work much more loosely when forming a structure. I played around with some hexagon laser cut shapes that I then attached my drawings of natural forms onto; they produced looser structures that did not resemble any geometric form previously created. The images below show changes within precision and composition as there is not any specifics, this experimental work does not seem fitting with my theme of 'order and chaos', but taking this direction into consideration has made me aware of working bigger on construction with technical precisions being deeply thought about beforehand.
  
 

My Presentation...

My Presentation Review

When it comes to presentations and speaking out load in front of a group of people, I immediately begin to panic and this PE presentation was no different. As I was extremely nervous, I wanted to go in as confident as I possibly could so I rehearsed what I was going to discuss frequently the week before hand. I recorded myself a couple of times and listened to it back, it did help me to realise where I was lacking confidence and where I had little to talk about in reference to the images I had selected for the PowerPoint, I made all relevant changes. I also created trigger cards for self-reassurance in case I began to stutter or lose track of where I was up to. However, I think as I had major notes on the back of my trigger cards they became a distraction when delivering my presentation. I became more focused on reading what I had previously written rather than speaking to the audience directly, I noticed this negative a third way through the presentation, after I had noticed this I put the cards to the side and began focusing on what was on the screen and what I was discussing began to flow easier. Looking directly at the audience made me nervous so I did focus my attention more onto the screen than the audience, this is where my presentation could greatly be improved. At the end of my presentation, I felt as though I had literally ran back to my seat instead of standing firm and answering the questions put forward for me at the front. I was asked a couple of questions once I had sat down, I became more confident in answering them because I was sat down and it felt less formal. Presentations are my weakest area but preparing for them in more depth did help in general. I have been given good feedback from the presentation, I was told that I am able to clearly outline what has been going wrong in my practice, I spoke clearly and that I had good visuals which I was really impressed with.




Selecting the appropriate material...

I have begun working on how to incorporate the geometric shapes that I have been creating with my digital drawings of natural forms. The natural forms represent the 'nature' within my theme with the shapes created using laser cutting representing the 'man made'. I want to find a method of combining the two that would give me a professional finish. Laser cutting is an option but material choice would need to be taken into consideration as the thickness of a material can affect the result majorly, as seen below. I opted to use plastic because it was a transparent material, that was static and therefore strong enough to hold on a larger scale but with no flexibility available, the plastic had to be cut then attached together using glue, which resulted in a messier and raw outcome. I want my outcome in Unit X to be created from perfectly conjoined geometric shapes that have a clear professional finish, not a raw and unfinished-looking result.
 

However, I did experiment with these pieces with my natural form drawings printed on top, to allow me to visualise whether they would work bigger or not. I added small holes to the plastic, big enough to allow thread to pass through so that I could suspend the shapes in a similar style to that of Tomas Saraceno's work. I do not think this is a positive result, the triangles created look unfinished and cheap. By doing this experimenting, it has confirmed that for my final design samples and result, I would work with a flexible material so that perfectly combined geometric shapes are achieved to a professional quality.
  




Forming Ideas...

As my work has begun to develop, I have decided to aim my work in the direction that will aim towards a gallery-situated outcome. I decided to work towards a gallery-situated outcome because it allows me with the space needed to work on a much larger scale, it would also be the right setting for my work to be admired and appreciated by a variety of people.

I would like to produce an installation that will be consistently made up from the geometric forms that I have been working on. The geometric 3-d shapes will include my natural forms through the method of either laser cutting or print, as this is my specialism.

I want my installation to represent 'man made harnessing nature' instead of what is perceived as the human kind causing damage resulting in climate change. As the climate shifts, damage is being create upon the natural environment and through my method of laser cutting or print, I want to capture aspects of nature that are being damaged or overlooked and present them in a manmade setting that is consistent and would always be protected.

I know that my final piece that my Unit X will work towards creating an area that could possibly be walked under, it will consist of my geometric shapes, made from a transparent material combined with my digital drawings of natural forms. The shape and presentation of the outcome that I should be working towards is so far difficult to achieve, I began looking for inspiration through other artists work and their presentation of it as a way of generating ideas that I could then interpret myself.

Cerith Wyn Evans work is the inspiration for this idea. From the use of the bright light appears an uplifting, angelic and beautiful presence however, the glowing columns create presence by the sheer heat they project across the room, creating an unbearable heated atmosphere that can be 'deeply unpleasant'. Evans uses heat to portray the 'rage of desire', in opposition to the cool embrace given from upstairs, giving me a representation of heaven and hell. The simple presentation of columns is what I admire about this work; I wanted to visit the idea of using columns in my work through this drawing. I like the combination of columns alongside individually stacking my geometric cubes. I chosen to work with cubes for this design because of the simplicity they offer in being a even 6-sided shape, the natural forms would provide the detail.


Even though the stacked columns would provide me with a simple and elegant presentation, I want to produce a presentation that has more to offer within its construction. Jim Campbell in his work 'Exploded View (Commuters)', 2001 offers an idea on how to do this. I have kept the idea of using multiples in the back of my mind and this is where it came through, I like the concept of using multiples of one geometric shape all brought together to form the same shape but on a much larger scale, similar to that of Campbell's work presented below. The construction of a piece like this is difficult but the result would be worthwhile, the precision needed for this construction is what would represent the 'order' within my theme. For ideas like this to visualise, I need to work on the technical side of my shapes and how I would incorporate my natural from drawings on them i.e. print.  
   


 

Thursday 16 January 2014

Experimentation- Laser Engraving...

Firstly, I wanted to experiment with engraving my designs of natural forms onto acetate because it so far had proved to be a positive and prospective material to use. However, my first attempt failed, I finished with a pile of burnt acetate because the laser did not engrave, it laser cut straight through the material because of the measurements I had applied to the setting. From this, I reset the settings, which resulted in a successful outcome, I did manage to engrave one of my natural form designs onto acetate, however the result was not as good as expected. The engraved design in some light is barely visible which was extremely disappointing as using acetate these were the either two ways the result was going to result in, both not promising outcomes.


As engraving onto acetate was unsuccessful, I decided to experiment with transparent plastics once again. The strength and thickness of the plastic worked better when engraving into it but the material itself lacks the fluidity that made acetate successful for working towards and creating 3-dimensional forms. Presently, material choice needs further consideration.


 I want my material to hold the specific elements of transparency, slight fluidity for bending and can be engraved or printed on.
  

A New Technique...

After going into tutorial with ideas of visualisations and prospective outcome ideas, it was suggested that I look at other sources of materials that could work better on a larger scale. Acetate works on a small scale and in multiples as a way of sampling but now, my visualisations are on a much larger scale than originally thought, material choice is becoming a prominent issue to consider. As my theme is of 'Order and Chaos', I decided to experiment with using the laser cutter in order to create specific measured shapes that I could then experiment with and represent the 'order' within my theme. 

I also wanted to use the laser cutter as another form of method to apply my drawings onto a material. Using the laser cutter also allows me to experiment broadly with material choice because the laser cutter can cut through most materials; it gives me extra room to explore. I find using computer applications difficult so using Illustrator to put my designs through to the laser cutter was a time-consuming process. After playing around with Illustrator, I created files that were successfully used on the laser cutter, these files produced simple cut shapes that were all sized consistently, and I even engraved into wood and plastic.



I did chose to work mainly with transparent materials such as Perspex and plastic because I wanted to carry on with the aspect of looking through what is created. I began experimenting with creating different forms and shapes from the laser cut pieces, working without a specific precision
or outcome is hard for me. I created some small-scale triangle pieces that do not fit precisely together but this works for the outcome, they are raw and interesting; I love the pieces when light flickers of them, and they remind me of diamonds. On a large scale, I would prefer these triangles to perfectly slot together to portray the 'Order' within my theme, I also would like my drawings to be placed on the material through the technique choice of laser engraving which would need testing and this is where my next step will begin.